#1. Move furniture to the center of the room, making enough space to reach desirable areas to paint.

#2. Cover the furniture with new plastic covers.

#3. Use a paper cover to place around the floor, close to the walls, using painter's tape.

#4. Cover the floors with drop cloths.

#5. Patch any nail holes, cracks or imperfections. Caulk around the trims where needed. Sand imperfections. Apply primer where needed.

#1. Start painting the edges of the ceiling and around light fixtures.

(Look for any cracks or stains before painting and make sure to take care of any small damage first or report to the manager about any major repairs).

#2. Paint the ceiling with a roller, drawing straight lines one next to the other. Get enough paint on the roller and apply without adding too much pressure. Keep the roller wet enough all the way through. Make sure there is no paint excess or marks left between the lines.

Add caulk between gaps. Clean the surfaces. Apply one coat of primer.

Paint the baseboards, crown moldings, window trims and doors with multiple coats. Wait one to two hours between coats. 

Apply the paint using a new brush performing even movements, left and right or up and down, to match the original wood texture.

Prevent brush marks or spills by adding the appropriate amount of paint to the brush, not too much but not too little. Keep the brush wet at all times to prevent it from drying.

Siobhan Costain - Manager